Near infra-red light detection enhancement of plasmonic photodetectors

Nowadays numerous are the applications interested in exploiting near infrared light detection like LiDAR (at 850 - 950 nm wavelengths), NIR spectroscopy, quantum computation, and the detection of light from NIR emitting scintillators. Silicon based single photon avalanche diodes (SPAD) could be a valid device achieving high detection efficiency and high timing resolution. Moreover, they can provide single photon sensitivity in large areas if arranged in extended arrays named Silicon Photomultipliers (SiPM). Nevertheless, the Photon Detection Efficiency (PDE) of standard SiPMs in the NIR range is strongly limited by the relatively low Si absorption coefficient, leading to an absorption depth much larger than the typical active thickness of Si SPAD, i.e. 18 μm at 850 nm compared to some few μm’s. Hence, the performance of Si based detectors in NIR range is still inadequate for almost all the cited applications. A potential solution to overcome the limited Si absorption coefficient is to couple these photodetectors with a structure supporting highly confined light such as plasmonic oscillations, thus increasing the absorption. In recent years, the development in nanophotonic demonstrated that the interphase between metallic nanostructured and dielectric surface can support Surface Plasmon Polaritons (SPP) i.e. electrons collective oscillation highly confined along the thickness of the device. Some of these interesting nanostructured are: i) 1- and 2-dimensional gratings; ii) bullseye structures; iii) nano-pillars and nano-holes arrays. Among those, 1D and 2D metallic nanograting are the most promising structures considering their feasibility and possible integration with Si based photodetector and SiPM technologies. In this contribution, we investigated the integration of a bidimensional metallic plasmonic nanograting structure on state of art photodetectors (PDs). For ease of production and characterization, the test devices consisted of conventional Silicon photodiodes instead of a proper SPAD. The PDs have been produced at the facility of Fondazione Bruno Kessler (Trento, Italy) using a custom CMOS-like microfabrication process similar the one used for FBK-SiPM technology. The previous described metallic nanograting is directly fabricated on a PDs by i) Electron Beam Lithography (EBL), ii) silver deposition, and iii) lift-off. Afterwards, the quantum efficiency (QE) of the produced samples have been measured in (450-1100) nm range. The first results are promising with an enhancement of about 45% at 950 nm with respect to the reference PD without any plasmonic nanostructured on top

Immune Response After Cochlear Implantation

A cochlear implant (CI) is an electronic device that enables hearing recovery in patients with severe to profound hearing loss. Although CIs are a successful treatment for profound hearing impairment, their effectivity may be improved by reducing damages associated with insertion of electrodes in the cochlea, thus preserving residual hearing ability. Inner ear trauma leads to inflammatory reactions altering cochlear homeostasis and reducing post-operative audiological performances and electroacoustic stimulation. Strategies to preserve residual hearing ability led to the development of medicated devices to minimize CI-induced cochlear injury. Dexamethasone-eluting electrodes recently showed positive outcomes. In previous studies by our research group, intratympanic release of dexamethasone for 14 days was able to preserve residual hearing from CI insertion trauma in a Guinea pig model. Long-term effects of dexamethasone-eluting electrodes were therefore evaluated in the same animal model. Seven Guinea pigs were bilaterally implanted with medicated rods and four were implanted with non-eluting ones. Hearing threshold audiograms were acquired prior to implantation and up to 60 days by recording compound action potentials. For each sample, we examined the amount of bone and fibrous connective tissue grown within the scala tympani in the basal turn of the cochlea, the cochleostomy healing, the neuronal density, and the correlation between electrophysiological parameters and histological results. Detection of tumor necrosis factor alpha, interleukin-6, and foreign body giant cells showed that long-term electrode implantation was not associated with an ongoing inflammation. Growth of bone and fibrous connective tissue around rods induced by CI was reduced in the scala tympani by dexamethasone release. For cochleostomy sealing, dexamethasone-treated animals showed less bone tissue growth than negative. Dexamethasone did not affect cell density in the spiral ganglion. Overall, these results support the use of dexamethasone as anti-inflammatory additive for eluting electrodes able to protect the cochlea from CI insertion trauma

Transmission Electron Microscopy, High Resolution X-Ray Diffraction and Rutherford Backscattering Study of Strain Release in InGaAs/GaAs Buffer Layers

Strain release and dislocation distribution in InGaAs/GaAs double heterostructures, step-graded and linear-graded buffer layers have been studied. A higher misfit dislocation density at the inner interface between the InGaAs layer and the substrate was found in all the samples. This corresponded to a strain release of the inner ternary layers much larger than predicted by equilibrium theories. The residual parallel strain of the external layers as a function of their thickness was found to follow a curve approximately of slope -0.5, in agreement with previous investigations on single InGaAs layers. This result has been interpreted as evidence that the elastic energy per unit interface area remains constant during the epilayer growth. The presence of numerous single and multiple dislocation loops inside the substrate was attributed to the strain relaxation occurring through dislocation multiplication via Frank-Read sources activated during the growth. A comparison with InGaAs/GaAs step-graded and linear-graded heterostructures is also shown and briefly discussed. Finally, lattice plane tilts between epilayers and substrates have been found due to the imbalance in the linear density of misfit dislocations with opposite component of the Burgers vector, b⊥eff, perpendicular to the interface

A Comprehensive Comparison of Bovine and Porcine Decellularized Pericardia: New Insights for Surgical Applications

Xenogeneic pericardium-based substitutes are employed for several surgical indications after chemical shielding, limiting their biocompatibility and therapeutic durability. Adverse responses to these replacements might be prevented by tissue decellularization, ideally removing cells and preserving the original extracellular matrix (ECM). The aim of this study was to compare the mostly applied pericardia in clinics, i.e. bovine and porcine tissues, after their decellularization, and obtain new insights for their possible surgical use. Bovine and porcine pericardia were submitted to TRICOL decellularization, based on osmotic shock, detergents and nuclease treatment. TRICOL procedure resulted in being effective in cell removal and preservation of ECM architecture of both species' scaffolds. Collagen and elastin were retained but glycosaminoglycans were reduced, significantly for bovine scaffolds. Tissue hydration was varied by decellularization, with a rise for bovine pericardia and a decrease for porcine ones. TRICOL significantly increased porcine pericardial thickness, while a non-significant reduction was observed for the bovine counterpart. The protein secondary structure and thermal denaturation profile of both species' scaffolds were unaltered. Both pericardial tissues showed augmented biomechanical compliance after decellularization. The ECM bioactivity of bovine and porcine pericardia was unaffected by decellularization, sustaining viability and proliferation of human mesenchymal stem cells and endothelial cells. In conclusion, decellularized bovine and porcine pericardia demonstrate possessing the characteristics that are suitable for the creation of novel scaffolds for reconstruction or replacement: differences in water content, thickness and glycosaminoglycans might influence some of their biomechanical properties and, hence, their indication for surgical use

Continuous pulse advances in the negative ion source NIO1

Consorzio RFX and INFN-LNL have designed, built and operated the compact radiofrequency negative ion source NIO1 (Negative Ion Optimization phase 1) with the aim of studying the production and acceleration of H- ions. In particular, NIO1 was designed to keep plasma generation and beam extraction continuously active for several hours. Since 2020 the production of negative ions at the plasma grid (the first grid of the acceleration system) has been enhanced by a Cs layer, deposited though active Cs evaporation in the source volume. For the negative ion sources applied to fusion neutral beam injectors, it is essential to keep the beam current and the fraction of co-extracted electrons stable for at least 1 h, against the consequences of Cs sputtering and redistribution operated by the plasma. The paper presents the latest results of the NIO1 source, in terms of caesiation process and beam performances during continuous (6{\div}7 h) plasma pulses. Due to the small dimensions of the NIO1 source (20 x (diam.)10 cm), the Cs density in the volume is high (10^15 \div 10^16 m^-3) and dominated by plasma-wall interaction. The maximum beam current density and minimum fraction of co-extracted electrons were respectively about 30 A/m^2 and 2. Similarly to what done in other negative ion sources, the plasma grid temperature in NIO1 was raised for the first time, up to 80 {\deg}C, although this led to a minimal improvement of the beam current and to an increase of the co-extracted electron current.Comment: 11 pages, 7 figures. Contributed paper for the 8th International symposium on Negative Ions, Beams and Sources - NIBS'22. Revision 1 of the preprint under evaluation at Journal of Instrumentation (JINST